Table of Contents

minLevel	1
maxLevel	7
style	none

Code writing recommendations

ExpandUse uppercase for

Table of Contents

minLevel	1
maxLevel	7
style	none

Coding Style

Expand

Use uppercase for all Fortran instructions, variable names

Use lowercase for pre-compiler directives

Comments need to should be written in English only (uppercase & lowercase accepted)

Tabulations are forbidden (to be replaced by spaces at the beginning of line)

Use meaningful names for variables, in English, keep the same name throughout the code

Systematically indent your blocks (IF/END IF, DO/END DO, ...) in a homogeneous way for clarity of the code

In case of long IF/ELSE/END IF block, it is recommended to add comment like below:

Code Block

language	fortran

  IF       IF (A==0) THEN
!           mymy long block
!        ...
       ELSE ! A/=0
!       my    my second long block
!        ...
       END IF

Routine & file organisation

Expand

By default, one file contains only one subroutine or function, except when the understanding of the code is facilitated by grouping few procedures

The name of the subroutine (function) and the name of the file need to match. A “.F" suffix is added to the file name to automatically call the precompilerThe same 2 rules apply for modulesame rule applies for modules: one module per file, same name

For module several subroutines can be defined under the CONTAINS close

Header definition

Expand

Each source file should have the copyright notice

Each procedure needs to have a conforming header, containing by order of appearance:

A minimal description of the routine
The list of caller subroutines/functions
The list of called subroutines/functions
The SUBROUTINE/FUNCTION declaration with the list of dummy arguments, 5 per line, matching the call declaration
The used modules
The implicit_f.inc (IMPLICIT NONE)
The optional remaining global parameters and commons if any (for compatibility with the past)
The list of dummy arguments, one per line with its type, INTENT attribute, explicit bounds in case of array, a short description of the variable
The local variables
The source code

Info

Notes:

The list of callers/callees is automatically generated

and its actual look and feel may change according to external documentation tool choice retained (Doxygen, FORD, …)

All dummy and local variables are declared using Fortran90 style

It is important to respect the order given above as some dummy or local variables may use parameters defined in modules (commons or include files)

implicit_f

implicit_f.inc must always be included. It automatically includes IMPLICIT NONE instruction

. It also automatically includes

, the definition of my_real

.inc which defines my_real

(as REAL*8 for double precision or REAL*4 for single precision) and constant.inc which defines numerical constant variables like ZERO here
Explicit bounds of all arrays are mandatory; the use of “*" is now forbidden for clarity

, error detection, and to ease compiler optimization of the code. The use of hardcoded constant size should be avoided and systematically replaced by a parameter defined in a module or passed as argument

Example:

INTEGER IPARG(60, *) Forbidden

INTEGER IPARG(NPARG,

Example:

INTEGER IPARG(60, *) Forbidden

INTEGER IPARG(NPARG, NGROUP) Authorized

Fortran routine generic example:

Code Block

language	fortran

Cgw|============================================================
Cgw|  PENCOMP                         src/interf/pencomp.F
Cgw|------------------------------------------------------------
Cgw|  Description:
Cgw|  Compute new penetration for contacts
Cgw|------------------------------------------------------------
Cgw|-- called by -----------
Cgw|         PRECOMP                      src/interf/precomp.F
Cgw|-- calls ---------------
Cgw|         PENNEW                       src/inter/pennew.F
Cgw|============================================================
      SUBROUTINE PENCOMP(
     1   ISIZE, IFORM, CAND_N, FACT, PEN0,
     2   NORM , PNEW )
C-----------------------------------------------
C M o d u l e s
C-----------------------------------------------
     USE ELBUFDEF_MOD
C-----------------------------------------------
C I m p l i c i t T y p e s
C-----------------------------------------------
#include "implicit_f.inc"
C-----------------------------------------------
C G l o b a l P a r a m e t e r s
C-----------------------------------------------
#include "mvsiz_p.inc"
C-----------------------------------------------
C C o m m o n B l o c k s
C-----------------------------------------------
C-----------------------------------------------
C D u m m y A r g u m e n t s
C-----------------------------------------------
      INTEGER, INTENT (IN) :: ISIZE ! length of CAND_N
      INTEGER, INTENT (IN) :: IFORM ! formulation used : 1 == standard
                                     !                    2 == improved
      INTEGER, INTENT (IN) :: CAND_N(ISIZE) ! contact node candidates
! REAL ou REAL*8 
      my_real, INTENT (IN)  :: PEN0(ISIZE) ! initial penetration
      my_real, INTENT (IN)  :: NORM(ISIZE) ! master segment normal 
      my_real, INTENT (IN)  :: FACT ! initial scale factor
      my_real, INTENT (OUT) :: PNEW(ISIZE) ! new computed penetration
C-----------------------------------------------
C L o c a l V a r i a b l e s
C-----------------------------------------------
      INTEGER :: I,J, K, LAST
      my_real :: PENEOLD(MVSIZ)
C-----------------------------------------------
C S o u r c e L i n e
C-----------------------------------------------
! Fortran code of the routine respecting indentations
      K = 0
      DO I = 1,ISIZE,MVSIZ ! do the loop by packet of MVSIZ
        LAST = MIN(I+MVSIZ,ISIZE)
        IF (IFORM > 0) THEN
          DO J = 1, LAST
            PENEOLD(J) = FACT*PEN0(CAND_N(I+J-1))
          END DO
        ELSE
         PENEOLD(1:LAST) = ZERO ! F90 notation ok
! ZERO defined in constant.inc automatically included within implicit.inc 
        END IF
        CALL PENNEW(I,LAST,K,PENEOLD,PNEW,CAND_N)
        K = K+MVSIZ
      END DO
! ...

      RETURN
      END SUBROUTINE PENCOMP

Comments

Expand

It is important to comment important algorithms, especially when non straightforward coding is used

Comments are written in English

Comments respect Fortran90 standard. The use of "!" at beginning of line is preferred to "C" or "*"

Except for precompiler directives, the following characters ',", \, /*, */, # are forbidden, even inside comments. Especially "\" is dangerous as it is interpreted as a continuation line by the precompiler

Example:

Code Block

language	fortran

! this is a legal comment
      A = A + B ! this one is also authorized in FORTRAN 90
      C = A + C ! next instruction ignored cause of this char \
      D = C + D

Modules

Expand

Module Format

Generic format of a Fortran90 module is as follows:

Code Block

language	fortran

MODULE <module name>
  USE [other module list]
  #include "implicit_f.inc"
  <declaration section>
  CONTAINS
  <procedure definitions>
END MODULE <module name>

Naming Convention

Module name is defined as follows: MODULENAME_MOD

With module file name: modulename_mod.F

Module file is placed at the same location as other files used by the option

Module Usage

3 types of usage:

Derived data types definition
Variable names declaration (in replacement of commons)
Procedure interface (data type & argument list control,…)

Good practice is to split type declaration from variable declaration into 2 different modules.

This way it is possible to pass variables defined in modules at upper level (resol) into calling tree at lower levels

Then, such derived data type variables passed as argument of procedures can be defined using the module which defines them, allowing traceability of such variables throughout the code

The procedure that uses such variables passed by argument needs to include the module that defines derived data types

Example of derived data types (comments compliant with Doxygen):

Code Block

language	fortran

C====================================================================
C  DUMMYDEF_MOD                     modules/dummydef_mod.F       
C-------------------------------------------------------------------
C> Description:
C> define DUMMY struture
C-------------------------------------------------------------------
C> called by:                                                     \n
C> @ref     DUMMY                 starter/src/test/dummy.F        \n
C> @ref     DINIT                 starter/src/test/dinit.F        \n
C> @ref     DSOLVE                starter/src/test/dsolve.F       \n   
C>\n calling:                                                     \n
C====================================================================
      MODULE DUMMYDEF_MOD
C----------------------------------------------------------------------- 
C-----------------------------------------------
C   M o d u l e s
C-----------------------------------------------
C-----------------------------------------------
C   m y _ r e a l
C-----------------------------------------------
C-----------------------------------------------
C   I m p l i c i t   T y p e s
C-----------------------------------------------
#include      "implicit_f.inc"
C=================================================
        TYPE DUMMY_STRUCT_
C=================================================
          INTEGER :: L_ITAB !< size of integer array ITAB
          INTEGER :: L_RTAB !< size of integer array RTAB
          INTEGER, DIMENSION(:) , POINTER ::  ITAB !< integer array ITAB
          my_real, DIMENSION(:) , POINTER ::  RTAB !< real array RTAB
        END TYPE DUMMY_STRUCT_
      END MODULE DUMMYDEF_MOD

C====================================================================
C  DINIT                 starter/src/test/dinit.F       
C-------------------------------------------------------------------
C> Description:                                                    \n
C> Allocate and initialize variable MY_DUM of type DUMMY_STRUCT_
C-------------------------------------------------------------------
C> called by:                                                      \n
C> @ref      DUMMY                  starter/src/test/dummy.F       \n
C>\n calling:                                                      \n
C====================================================================
      SUBROUTINE DINIT(MY_DUM, NITEMS)
C-----------------------------------------------
C   M o d u l e s
C----------------------------------------------- 
      USE DUMMYDEF_MOD
C-----------------------------------------------
C   I m p l i c i t   T y p e s
C-----------------------------------------------
#include      "implicit_f.inc"
C-----------------------------------------------
C-----------------------------------------------
C   G l o b a l   P a r a m e t e r s
C-----------------------------------------------
C-----------------------------------------------
C   C o m m o n   B l o c k s
C-----------------------------------------------
C-----------------------------------------------
C   D u m m y   A r g u m e n t s
C-----------------------------------------------
      INTEGER, INTENT(IN) :: NITEMS
      TYPE(DUMMY_STRUCT_), INTENT(INOUT) :: MY_DUM
C-----------------------------------------------
C   L o c a l   V a r i a b l e s
C-----------------------------------------------
      INTEGER :: N, IERROR
C-----------------------------------------------
      MY_DUM%L_ITAB = NITEMS
      MY_DUM%L_RTAB = NITEMS

      ALLOCATE(MY_DUM%ITAB(MY_DUM%L_ITAB),MY_DUM%RTAB(MY_DUM%L_RTAB),
     &         STAT=ierror)
      IF (IERROR /= 0) THEN ! better to use MY_ALLOCATE macro instead
         print*,'error:',IERROR
         stop 123
      END IF

      DO N = 1, NITEMS
        MY_DUM%ITAB(N) = N
        MY_DUM%RTAB(N) = N**2
      END DO

      RETURN
      END SUBROUTINE DINIT

C====================================================================
C  DSOLVE                 starter/src/test/dsolve.F       
C-------------------------------------------------------------------
C> Description:                                                    \n 
C> Solve some dummy problem
C-------------------------------------------------------------------
C> called by:                                                       \n
C> @ref DUMMY                  starter/src/test/dummy.F             \n
C>\n calling:                                                       \n
C|====================================================================
      SUBROUTINE DSOLVE(MY_DUM,RES)
C-----------------------------------------------
C   M o d u l e s
C----------------------------------------------- 
      USE DUMMYDEF_MOD
C----6------------------------------------------
C   I m p l i c i t   T y p e s
C-----------------------------------------------
#include      "implicit_f.inc"
C-----------------------------------------------
C   G l o b a l   P a r a m e t e r s
C-----------------------------------------------
C   C o m m o n   B l o c k s
C-----------------------------------------------
C-----------------------------------------------
C   D u m m y   A r g u m e n t s
C-----------------------------------------------
      TYPE(DUMMY_STRUCT_), INTENT(INOUT) :: MY_DUM
      my_real, INTENT(OUT) :: RES
C-----------------------------------------------
C   L o c a l   V a r i a b l e s
C-----------------------------------------------
      INTEGER :: N, NITEMS,IERROR
      my_real :: VERIF 
C-----------------------------------------------
      NITEMS = MY_DUM%L_RTAB
      RES = 0.
      VERIF = 0.
      DO N = 1, NITEMS
        RES = RES + MY_DUM%RTAB(N)
        VERIF = VERIF + N**2
      END DO
      print *,'res=',res,' verif=0?:',RES-VERIF
      DEALLOCATE(MY_DUM%ITAB,MY_DUM%RTAB,STAT=IERROR)
      print *,'solve terminated with error code:',IERROR
      RETURN
      END
	
!====================================================================
! DUMMY                 starter/src/test/dummy.F                   
!====================================================================
!> Description:                                                    \n
!> Main routine which initialize and use a variable
!> of type DUMMY_STRUCT_
!====================================================================
!>\n called by:                                                    \n
!> @ref       DUMMYEXT              starter/src/test/dummyext.F    \n
!>\n calling:                                                      \n
!> @ref       DINIT                 starter/src/test/dinit.F       \n
!> @ref       DSOLVE                starter/src/test/dsolve.F      \n
!====================================================================
      SUBROUTINE DUMMY(NITEMS)
C-----------------------------------------------
C   M o d u l e s
C----------------------------------------------- 
      USE DUMMYDEF_MOD
C-----------------------------------------------
C   I m p l i c i t   T y p e s
C-----------------------------------------------
#include      "implicit_f.inc"
C-----------------------------------------------
C-----------------------------------------------
C   G l o b a l   P a r a m e t e r s
C-----------------------------------------------
C-----------------------------------------------
C   C o m m o n   B l o c k s
C-----------------------------------------------
C-----------------------------------------------
C   D u m m y   A r g u m e n t s
C-----------------------------------------------
      INTEGER, INTENT(IN) :: NITEMS ! number of NITEMS
C-----------------------------------------------
C   L o c a l   V a r i a b l e s
C-----------------------------------------------
      TYPE(DUMMY_STRUCT_) MY_DUM ! dummy structure
      my_real RES ! result of dummy solve
C-----------------------------------------------
      CALL DINIT(MY_DUM,NITEMS)
      CALL DSOLVE(MY_DUM,RES)
      RETURN
      END SUBROUTINE DUMMY

!====================================================================
! DUMMYEXT                 starter/src/test/dummy.F                   
!====================================================================
!> Description:                                                    \n
!> main program calling dummy                                      \n
!>\n called by:                                                    \n
!>\n calling:                                                      \n
!> @ref       DUMMY                 starter/src/test/d.F           \n
!====================================================================
!> \warning program should not be put in the same file, just for
!> convenience and for the aim to put some warning message blablabla
!> \bug not good to call "dummy(10)", should be passed by address instead of a value
C====================================================================
      PROGRAM DUMMYEXT
      CALL DUMMY(10)
C> @note this comment is ignored or would be applied to next subroutine
C never do that with DOxygen !!!
C all Doxygen comments need to be put before the routine definition
      END PROGRAM DUMMYEXT

Restart Variables

All the variables communicated between Starter and Engine are declared in module RESTART_MOD, used by subroutine ARRALLOC for their allocation, by RDRESB for their reading from RESTART file, then by RESOL_HEAD in which they are used as argument for RESOL subroutine. All these argument variables are then passed by argument to procedures called from RESOL, ...)

Interface definition

Fortran90 interface allows the compiler to do additional checks like coherency between argument types, attributes and number between calling and callee routines. It is required in some cases like when a procedure has a dummy argument with attribute ALLOCATABLE, POINTER, TARGET

In practice, it was introduced in few places of the code for routines which were called at several different places

Such coherency is automatically tested by QA static analysis tools (Forcheck).

And for pointer, the good practice is to use derived data types instead of pointer directly

Therefore, the remaining use of interface is regarding routine with optional arguments

This feature should be spread in the code instead of adding additional “dummy” arguments

Interface Example

Example of an interface for a routine called at several places in the code. The routine is put in a module to guarantee automatic update of interfaces and recompilations of all routines using this routine in case of change (dependence automatically found by compiler)

Code Block

language	fortran

MODULE INITBUF_MOD
      CONTAINS
Cgw|============================================================
Cgw|  INITBUF                         src/resol/initbuf.F
Cgw|------------------------------------------------------------
Cgw| Description :
Cgw| Initialisation of vect01_c.inc variables
Cgw|-- called by -----------
Cgw|  FORINT                          src/resol/forint.F
Cgw|  FORINTS                         src/resol/forints.F
Cgw|  ALEMAIN                         priv/ale/alemain.F
Cgw|============================================================
      SUBROUTINE INITBUF (IPARG    ,NG      ,
     2   MTN     ,LLT     ,NFT     ,IAD     ,ITY     ,
 C  … 
     6   IREP    ,IINT    ,IGTYP   ,ISRAT   ,ISROT   ,
     7   ICSEN   ,ISORTH  ,ISORTHG ,IFAILURE)
C-----------------------------------------------
C   I m p l i c i t   T y p e s
C-----------------------------------------------
#include      "implicit_f.inc"
C-----------------------------------------------
C   C o m m o n   B l o c k s
C-----------------------------------------------
#include      "param_c.inc"
C-----------------------------------------------
C   D u m m y   A r g u m e n t s
C-----------------------------------------------
      INTEGER, INTENT (IN)  :: IPARG(NPARG,NGROUP),NG
      INTEGER, INTENT (OUT) :: MTN,LLT,NFT,IAD,ITY,NPT,JALE,ISMSTR,
     .   JEUL,JTUR,JTHE,JLAG,NVAUX,JMULT,JHBE,JIVF,JPOR,JPLA,JCLOSE,
     .   IREP,IINT,IGTYP,JCVT,ISROT,ISRAT,ISORTH,ISORTHG,ICSEN,IFAILURE
C-----------------------------------------------
C   S o u r c e  L i n e s
C======================================================================
      MTN     = IPARG(1,NG)    
      LLT     = IPARG(2,NG)    
…
      JCLOSE  = IPARG(33,NG)    
      IREP    = IPARG(35,NG)      
      IINT    = IPARG(36,NG)    
      JCVT    = IPARG(37,NG)
      IFAILURE = IPARG(43,NG)                  
C----
      RETURN
      END SUBROUTINE INITBUF
      END MODULE INITBUF_MOD

Cgw|============================================================
Cgw|  FORINT                          src/resol/forint.F
Cgw|------------------------------------------------------------
Cgw|-- called by -----------
Cgw|         RESOL                           src/resol/resol.F
Cgw|-- valls ---------------
Cgw|         INITBUF                         src/resol/initbuf.F
Cgw|============================================================
      SUBROUTINE FORINT(
     1    PM        ,GEO       ,X         ,A         ,AR        ,
     2    V         ,VR        ,MS        ,IN        ,W         ,
C… 
     K    MSNF      ,IGEO      ,IPM       ,XSEC      ,ITASK)
C-----------------------------------------------
C   M o d u l e s
C-----------------------------------------------
      USE INITBUF_MOD
C----6---------------------------------------------------------------7---------8
C   I m p l i c i t   T y p e s
C-----------------------------------------------
#include      "implicit_f.inc"
#include      "comlock.inc"
C-----------------------------------------------
C   G l o b a l   P a r a m e t e r s
C-----------------------------------------------
#include      "mvsiz_p.inc"
C-----------------------------------------------
C   C o m m o n   B l o c k s
C-----------------------------------------------
#include      "com01_c.inc"
#include      "com03_c.inc"
C-----------------------------------------------------------------
C   D u m m y   A r g u m e n t s
C-----------------------------------------------
      INTEGER IXS(NIXS,*),
     .   IXQ(NIXQ,*), IXT(NIXT,*), IXP(NIXP,*),
     .   IXR(NIXR,*), IELVS(*), IGEO(NPROPGI,*),
     .   IXS16(8,*),IADS16(8,*),ITASK
C     REAL ou REAL*8
      my_real
     .   X(3,*)    ,D(3,*)      ,V(3,*)   ,VR(3,*),
     .   MS(*)   ,IN(*)   ,PM(NPROPM,*),SKEW(9,*),GEO(NPROPG,*),
     .   BUFMAT(*) ,W(3,*)    ,VEUL(*),TF(*) ,FR_WAVE(*) 
C-----------------------------------------------
C   L o c a l   V a r i a b l e s
C-----------------------------------------------
      INTEGER INDXOF(MVSIZ)
      INTEGER I,II,J,N
      my_real
     .   FX(MVSIZ,20),FY(MVSIZ,20),FZ(MVSIZ,20),
     .   MX(MVSIZ,4),MY(MVSIZ,4),MZ(MVSIZ,4)
C======================================================================|
           CALL INITBUF (IPARG    ,NG      ,
     2        MLW     ,NEL     ,NFT     ,KAD     ,ITY     ,
     3        NPT     ,JALE    ,ISMSTR  ,JEUL    ,JTUR    ,
     4        JTHE    ,JLAG    ,JMULT   ,JHBE    ,JIVF    ,
     5        NVAUX   ,JPOR    ,JCVT    ,JCLOSE  ,IPLA    ,
     6        IREP    ,IINT    ,IGTYP   ,ISRAT   ,ISROT   ,
     7        ICSEN   ,ISORTH  ,ISORTHG ,IFAILURE)
C               
           ICNOD   = IPARG(11,NG)
           KADDSA  = 1+(KAD-1)*NDSAEXT
           NSG     = IPARG(10,NG)
C-----------
      RETURN
      END

Memory Allocation

Expand

Dynamic memory allocation mechanism

Dynamic memory allocation is directly done at the Fortran90 level using MY_ALLOCATE macro

This macro allows automatic error checks encapsulating call to Fortran90 ALLOCATE statement

Previously, allocation error check was done by hand by the:

Code Block

language	fortran

CALL ALLOCATE(ITAB(NUMNOD),STAT=IERR)
       IF(IERR/=0)THEN
               WRITE(ISTDO,’(A)’) ‘ERROR IN MEMORY ALLOCATION’
               WRITE(IOUT,’(A)’) ‘ERROR IN MEMORY ALLOCATION’
               CALL ARRET(2)
       END IF
C…
       CALL DEALLOCATE(ITAB)

In practice, error checking was missing in many places. Therefore, the idea to use a macro to automatically control allocation, handle error message and execution stop in case of failure was implemented.

Here is the macro detail:

Code Block

language	fortran

#ifndef MY_ALLOCATE
#define MY_ALLOCATE(ARRAY,LENGTH)\
ALLOCATE(ARRAY(LENGTH),STAT=MY_IERR);\
IF(MY_IERR/=0) THEN;\
CALL ANCMSG(MSGID=268,MSGTYPE=MSGERROR,ANMODE=ANSTOP,C1=#ARRAY);\
ENDIF
#endif

The previous code becomes:

Code Block

language	fortran

       USE MESSAGE_MOD
C…
#include “my_allocate.inc”
C…
       CALL MY_ALLOCATE(ITAB,NUMNOD)
C…
       CALL DEALLOCATE(ITAB)

Developers are required to check the success of the allocation

The message printed by this macro in case of allocation failure is rather generic. For large arrays it is preferred to print a specific message, with advice for the user, or at least the option concerned by this failure

Global Memory

Memory allocation of global data structures, arrays and derived data types, should be done at the highest level, in LECTUR for Starter, in RADIOSS2 or RESOL for Engine

It is advised to use derived data type with structure of arrays. This way it is possible to declare the variable at the upper level, gather the allocation of array members in a dedicated subroutine, then use the variable in procedures called at lower level without losing traceability

Local Memory

In a procedure, local variable allocation method depends on its size:

The size is known and limited to a multiple of MVSIZ

Automatic allocation in the stack is ok

The size is not known or larger than times MVSIZ

It is then too large to use automatic allocation in the stack. It is therefore needed to use dynamic allocation in the heap

Automatic Allocated arrays go into Stack

ALLOCATED ARRAYS go into Heap

One should take care to reduce Stacksize usage to a reasonable size.

Stacksize is hardcoded under Windows

It is allowed to use MY_ALLOCATE at the beginning of a routine provided matching DEALLOCATE is done at the end of this routine

In case of multiple calls to MY_ALLOCATE, a call to DEALLOCATE must be applied to the variable used in the last previous call to MY_ALLOCATE to avoid a memory hole and need for a garbage collector

Local Memory Example:

Code Block

language	fortran

CALL MY_ALLOCATE(VAR1)
      CALL MY_ALLOCATE(VAR2)
C…
      DEALLOCATE(VAR2)
C…
      CALL MY_ALLOCATE(VAR3)
C…
      DEALLOCATE(VAR3)
C…
      DEALLOCATE(VAR1)

Shared Memory Programming (SMP) and memory allocation

For Radioss Engine, OpenMP programming model is used for second level parallelization

By default any memory allocation done outside of a parallel section is shared between threads

Most of the parallel sections are started from RESOL. So for the need of a shared memory array, the simplest way is to declare it at the level of RESOL. It will be shared inside the different parallel sections started from RESOL, possibly passed by argument to routines called from RESOL

The same way, any variable defined in a common or module is shared by default

For pointer, notice that a single thread needs to allocate and deallocate it. The programmer has to manage synchronization in order to insure such a variable is allocated before being used by any other thread and no longer used before it is deallocated

The !$OMP THREADPRIVATE directive overrides default behavior by creating thread local storage variables

Array Aliasing

Expand

Description

Here we discuss different arguments of a procedure referencing the same memory locations. The compiler won’t be able to detect in the procedure that different argument variables reference one or more identical memory locations. Such a situation is particularly dangerous because of compiler optimization. Even if compilers are not forbidden it, if both variables are modified inside the procedure this could lead to unpredictable results. Potential conflicts or dependencies won’t be detected

Code Example:

Code Block

language	fortran

PROGRAM OVERMAIN
C------------------------------------------
       IMPLICIT NONE
C------------------------------------------
       PARAMETER (MAXLEN = 40)
       INTEGER BUFFER(MAXLEN),I,I1,LEN
C------------------------------------------
       I1 = 10
       LEN = 22
       DO I = 1, LEN
         BUFFER(I1+I-1) = I
       ENDDO
       print *,’init : buffer =’,(BUFFER(I1+I-1),I=1,LEN)
       CALL SHIFTI1(BUFFER,BUFFER(I1),I1,LEN) ! potential overlap
       print *,’result: buffer =’,(BUFFER(I1+I-1),I=1,LEN)
       STOP
       END

       SUBROUTINE SHIFTI1(BUFFER,TAB,I1,LEN)
C------------------------------------------
       IMPLICIT NONE
C------------------------------------------
       INTEGER BUFFER(*),TAB(*),I1,LEN
C------------------------------------------
       INTEGER I,LEN0,I10
C------------------------------------------
       LEN0 = 19
       I10 = I1 - LEN + LEN0
       DO I = 1, LEN
         BUFFER(I10+I-1) = TAB(I) ! true overlap
       ENDDO
       I1 = I10
       RETURN
       END

Tested on SGI O200 IRIX 6.4: output:

Code Block

language	bash

skippy 61% f77 -O2 -c *.F
overmain.F:
shifti1.F:
skippy 62% f77 -O2 -o overlaps *.o
skippy 63% overlaps
init : buffer =
1 2 3 4 5 6
7 8 9 10 11 12
13 14 15 16 17 18
19 20 21 22
result: buffer =
1 2 6 4 5 6
10 8 9 10 14 12
13 14 18 16 17 18
22 20 21 22

NoteConclusion:

Comments

Expand

It is important to comment algorithms, especially when non straightforward coding is used

Comments are written in English

Comments respect Fortran90 standard. The use of "!" at beginning of line is preferred to "C" or "*"

Except for preprocessor directives, the following characters ',", \, /*, */, # are forbidden, even inside comments. Especially "\" is dangerous as it is interpreted as a continuation line by the preprocessor

Example:

Code Block

language	fortran

! this is a legal comment
      A = A + B ! this one is also authorized in FORTRAN 90
      C = A + C ! next instruction ignored cause of this char \
      D = C + D

Modules

Expand

Module Format

Generic format of a Fortran90 module is as follows:

Code Block

language	fortran

MODULE <module name>
  USE [other module list]
#include "implicit_f.inc"
  <declaration section>
  CONTAINS
  <procedure definitions>
END MODULE <module name>

Naming Convention

Module name is defined as follows: MODULENAME_MOD

With module file name: modulename_mod.F

Module file is placed at the same location as other files used by the option

Restart Variables

All the variables communicated between Starter and Engine are declared in module RESTART_MOD, used by subroutine ARRALLOC for their allocation, by RDRESB for their reading from RESTART file, then by RESOL_HEAD in which they are used as argument for RESOL subroutine. All these argument variables are then passed by argument to procedures called from RESOL, ...)

Interface definition

Fortran90 interface allows the compiler to do additional checks like coherency between argument types, attributes and number between calling and callee routines. It is required in some cases like when a procedure has a dummy argument with attribute ALLOCATABLE, POINTER, TARGET

In practice, it was introduced in few places of the code for routines which were called at several different places

Such coherency is automatically tested by QA static analysis tools (Forcheck).

And for pointer, good practice is to use derived data types instead of pointer directly

Therefore, the remaining use of interface is regarding routine with optional arguments

This feature should be spread in the code instead of adding additional “dummy” arguments

Memory Allocation

Expand

Dynamic memory allocation mechanism

Large arrays should be allocatable arrays: Avoid using pointer when possible, and do not use automatic arrays. Arrays should be explicitly deallocated as soon as possible

Developers are required to check the success of the allocation

For large arrays it is preferred to print a specific message, with some advice for the user, or at least the option concerned by this failure

Nevertheless, there are macros that will check and print a generic error message

MY_ALLOCATE needs the file my_allocate.inc to be included and the module MESSAGE_MOD to be used
It is still mandatory to call DEALLOCATE;
MY_ALLOCATE2D and MY_ALLOCATE3D to be used for respectively 2 and 3 dimensional arrays.

See my_allocate.inc in GitHub for the definitions

Global Memory

Memory allocation of global data structures, arrays and derived data types, should be done at the highest level, in LECTUR for Starter, in RADIOSS2 or RESOL for Engine

It is advised to use derived data type with structure of arrays. This way it is possible to declare the variable at the upper level, gather the allocation of array members in a dedicated subroutine, then use the variable in procedures called at lower level without losing traceability

Local Memory

In a procedure, local variable allocation method depends on its size:

The size is known and limited to a multiple of MVSIZ	Automatic allocation in the stack is ok
The size is not known or larger than times MVSIZ	It is then too large to use automatic allocation in the stack. It is therefore needed to use dynamic allocation in the heap

It is allowed to use MY_ALLOCATE at the beginning of a routine provided matching DEALLOCATE is done at the end of this routine

In case of multiple calls to MY_ALLOCATE, a call to DEALLOCATE must be applied to the variable used in the last previous call to MY_ALLOCATE to avoid a memory hole and need for a garbage collector

Shared Memory Programming (SMP) and memory allocation

For OpenRadioss Engine, OpenMP programming model is used for second level parallelization

By default any memory allocation done outside of a parallel section is shared between threads

Most of the parallel sections are started from RESOL. So for the need of a shared memory array, the simplest way is to declare it at the level of RESOL. It will be shared inside the different parallel sections started from RESOL, possibly passed by argument to routines called from RESOL

The same way, any variable defined in a common or module is shared by default

For pointer, notice that a single thread needs to allocate and deallocate it. Synchronization may be needed after the allocation and before the deallocation

The !$OMP THREADPRIVATE directive overrides default behavior by creating thread local storage variables

Array Aliasing

Note
Array aliasing is forbidden when the variable is modified inside the procedure: two dummy arguments should not point to the same memory location

Example:

CALL MYROUTINE(A(1:8), A(7:10)) is not accepted because A(7) and A(8) are common to two dummy arguments

\uD83D\uDCCB Related articles

OpenRadioss Coding Standards

OpenRadioss Performance Aspects: Vectorization and Optimization

OpenRadioss Reader (Radioss Block Format)

OpenRadioss HMPP Development Insights

Versions Compared

Old Version 13

New Version Current

Key

Code writing recommendations

Coding Style

Routine & file organisation

Header definition

Fortran routine generic example:

Comments

Modules

Module Format

Naming Convention

Module Usage

Example of derived data types (comments compliant with Doxygen):

Restart Variables

Interface definition

Interface Example

Memory Allocation

Dynamic memory allocation mechanism

Global Memory

Local Memory

Local Memory Example:

Shared Memory Programming (SMP) and memory allocation

Array Aliasing

Description

Code Example:

Comments

Modules

Module Format

Naming Convention

Restart Variables

Interface definition

Memory Allocation

Dynamic memory allocation mechanism

Global Memory

Local Memory

Shared Memory Programming (SMP) and memory allocation

Array Aliasing

\uD83D\uDCCB Related articles

Page Comparison

Versions Compared

Old Version 13

New Version Current

Key

Code writing recommendations

Coding Style

Routine & file organisation

Header definition

Fortran routine generic example:

Comments

Modules

Module Format

Naming Convention

Module Usage

Example of derived data types (comments compliant with Doxygen):

Restart Variables

Interface definition

Interface Example

Memory Allocation

Dynamic memory allocation mechanism

Global Memory

Local Memory

Local Memory Example:

Shared Memory Programming (SMP) and memory allocation

Array Aliasing

Description

Code Example:

Comments

Modules

Module Format

Naming Convention

Restart Variables

Interface definition

Memory Allocation

Dynamic memory allocation mechanism

Global Memory

Local Memory

Shared Memory Programming (SMP) and memory allocation

Array Aliasing

\uD83D\uDCCB Related articles